How to Weave Hair for Highlights in Easy Steps!

Sharing is caring!

If you want to learn how to weave hair for highlights, you are in the right place. This method is used to color small parts of the hair without changing the whole head. It helps give your hair a fun, soft, and natural look.

Weaving hair means picking tiny strands of hair in a special way. These small sections are then colored using foil or a cap. It’s a common step in salons, but you can also try it at home if you follow the right steps.

Knowing how to weave hair for highlights is helpful if you want to add color to your hair in a stylish way. You can choose light or bold shades, and the weaving helps the colors blend in better. It also lets you control how much hair you want to highlight.

In this article, we will explain everything in easy steps. From what tools you need to how to do the weaving part, we will guide you. So, take your time, follow along, and you’ll learn how to do it like a pro.

source

Tools You Need to Weave Hair for Highlights

Before you start weaving hair for highlights, you need some tools. These tools will help you do the job better and easier. Here is a list of the things you will need:

• Tail Comb – This is a comb with a long, thin end. You use it to part and weave the hair. It helps pick small hair sections neatly so the highlights look clean.
• Hair Clips – These are used to hold the hair in place while you work. They stop the rest of the hair from getting in the way and make it easy to focus on one part at a time.
• Foil or Highlighting Cap – You can use foil to wrap the hair or a cap with small holes to pull hair through. Both ways help keep the hair sections separate and stop color from spreading.
• Gloves – Always wear gloves to keep your hands safe from the hair color. The color can hurt your skin, so gloves protect your hands and keep them clean.
• Hair Color Brush – This small brush is used to apply the color or bleach to the hair. It spreads the product evenly and helps you stay inside the woven sections.

Getting Ready Before You Start

Before you start weaving hair for highlights, make sure the hair is clean. Wash the hair with a gentle shampoo and rinse it well. Don’t forget to dry it fully before you begin. Wet hair is harder to work with and can make the highlights look uneven.

Next, brush the hair slowly to remove all tangles. Use a wide-tooth comb or soft brush. This helps to make the hair smooth and easy to separate. If the hair is messy or full of knots, it will be hard to weave nicely.

Now, it’s time to part the hair. Use a tail comb to make clear sections. You can make 3 or 4 big parts and clip them up. This will help you work slowly and neatly, one section at a time.

Lastly, wear gloves and keep all your tools ready. Put the comb, foils, clips, and highlighting brush near you. This saves time and helps you focus better while weaving hair for highlights. Being ready makes everything easier and less messy.

Step-by-Step Guide on How to Weave Hair for Highlights

Weaving hair for highlights means picking small strands of hair from a section to color them. It helps make the highlights look soft and natural. If you do the weaving right, the highlights will blend well and look really pretty.

This step-by-step guide will show you how to weave hair for highlights in a very easy way. You don’t need to be a hair expert. Just follow each step slowly and carefully.

Step 1: Part the Hair into Sections

First, you need to part the hair into smaller sections. Use a tail comb to do this. It helps you work better and not get confused with the hair. Start by parting the hair in the middle, then make small square or triangle shapes with the hair.

Use hair clips to hold the sections in place. This keeps the rest of the hair out of the way. When the hair is neat and ready, it’s much easier to weave. Make sure the hair is dry and tangle-free before starting.

Step 2: Pick a Thin Section of Hair to Weave

Now take one small section of hair from the front or side. Hold it flat between your fingers. This is the part where you will start weaving. It should be about 2-3 inches wide, not too thick or too thin.

Weaving works best when you go slow. You will now use the tail of your comb to pick every few strands from the top of this section, like going over and under. Leave some hair behind and pick some strands to color. This is called “weaving.”

source

Step 3: Use the Foil or Highlighting Cap

Once you weave the small strands, place a piece of foil under them. If you are using a cap, pull the hair through the small holes using a hook instead. The foil helps to keep the color from touching the other hair parts.

Make sure the hair is lying flat on the foil. You can press gently with your fingers. This helps make the coloring easier and neat. If you’re using a cap, be gentle when pulling the hair out so it doesn’t hurt.

Step 4: Apply the Hair Color or Bleach

Now it’s time to put the color or bleach on the hair strands you just weaved. Use a brush to apply the product. Start from the roots and move to the ends. Cover the hair well but not too much.

Be careful not to let the color touch the hair you didn’t weave. Fold the foil in half and press it lightly. This keeps the color in place. If using a cap, let the product sit as the label says.

source

Step 5: Let the Color Sit and Then Rinse

Leave the foil in for the time written on the hair dye box. Usually, it’s about 20 to 45 minutes. Don’t leave it for too long or it can damage the hair. Set a timer so you don’t forget.

After the time is done, carefully open the foil and rinse the hair with cool water. Use a soft shampoo and conditioner for colored hair. Gently dry the hair with a towel. Now your weaved highlights are ready and should look beautiful.

source

Tips for Best Results When Weaving Hair for Highlights

Weaving hair for highlights can be easy if you follow the right steps. It’s like drawing small lines with a comb to lift tiny parts of the hair. If you do it slowly and carefully, the highlights will look clean and pretty.

But if you rush or make a mistake, the color can look messy. That’s why knowing a few tips can really help you do a better job. Here are some simple and helpful tips for best results when you weave hair for highlights.

1. Always Work in Good Light

Good lighting helps you see the small hairs you need to pick. If the room is too dark or the light is yellow, it’s hard to weave the hair right. Try to sit near a bright window or use a white lamp when doing it. You will see the parts of hair better and make clean sections.

This also helps you spot any hair you missed or mixed by mistake. When you can see clearly, your highlights will come out neater and more even. So always choose a bright place before you begin.

2. Don’t Take Big Chunks of Hair

When weaving, always take thin small lines of hair. If you take big chunks, the color will not look soft. It might come out too thick or blocky. The trick is to take some hair and leave some hair in every section. That’s what makes the highlights look natural.

You can use the tail of a comb to pick hair like “one in, one out.” This gives a soft look and doesn’t damage the hair. So go slow and keep the lines thin when picking.

3. Use Hair Clips to Keep Things in Place

Hair clips are your best friends when weaving. They help hold the rest of the hair back so it doesn’t mix with the part you are working on. If the hair keeps falling in your way, it will be hard to stay neat.

Section the hair and clip it up before you start weaving each part. Only work on one piece at a time. This keeps things easy and clean and saves time too.

4. Comb the Hair Before You Start

It is always better to comb the hair well before you begin. Tangled hair makes weaving very hard. You might pull or miss some parts if there are knots. Always use a wide comb first, then a tail comb to smooth it out.

When the hair is soft and flat, weaving becomes much faster and better. It also helps the color spread evenly later on. So, don’t forget to comb from top to bottom first.

5. Keep a Steady Hand

Weaving needs a bit of focus. Try to keep your hand steady and don’t move too fast. If your hand shakes or jumps, you might pull the wrong hairs or mess up the pattern. A slow hand gives more control.

Take deep breaths and work in a calm way. It’s not a race, so you can take your time. The better your focus, the better your highlights will turn out in the end.

Common Mistakes to Avoid

One big mistake is picking too much hair when weaving. If you grab a large chunk, the highlights will not look soft or blended. Always try to take small and thin strands. This gives a more natural look.

Another mistake is not weaving the hair evenly. Some people pick hair randomly without checking both sides. Try to make the weaving even on all parts of your head. It will help the highlights look balanced and neat.

Sometimes people use too much bleach or color. This can hurt the hair and make it dry. Always follow the instructions on the box and don’t leave the color on for too long. Set a timer so you don’t forget.

Using a messy comb can also make the weaving bad. If the tail comb is bent or broken, it will not pick the hair nicely. Use a clean and sharp tail comb for better results. This makes weaving faster and cleaner.

Last mistake is skipping the sectioning step. If you don’t part your hair into small sections before starting, the weaving will be hard and confusing. Always clip up parts you are not working on. It makes the job easy and tidy.

Aftercare Tips for Highlighted Hair

After getting highlights, your hair needs some extra care. The bleach or color can make hair dry or weak. If you take care of it in the right way, your highlights will look nice and shiny for a long time. Below are some easy tips to keep your highlighted hair healthy and soft.

• Use shampoo for colored hair: Use a special shampoo made for colored or highlighted hair. It keeps the color bright and stops the hair from getting dull.

• Don’t wash hair every day: Washing your hair too much can fade the color. Try to wash your hair 2 or 3 times a week only.
• Use a good conditioner: Always use a conditioner after washing. It makes the hair soft and keeps it from feeling dry or rough.
• Try a deep hair mask once a week: A deep hair mask gives your hair extra moisture. It helps fix damage from bleach or color.
• Avoid hot tools often: Don’t use too much heat like straighteners or curling irons. If you must use them, apply heat spray before.
• Let your hair air dry sometimes: Try to let your hair dry without using a hairdryer. It gives your hair a break from heat.
• Stay out of strong sun: Too much sun can make the color fade. If you go out, wear a hat or use hair spray with UV protection.

CONCLUSION

Learning how to weave hair for highlights is a fun and useful skill. It helps you make your hair look bright and stylish without changing all your hair color. By using the right tools like a tail comb, foil, and clips, you can make nice, clean highlights at home or in a salon.

The weaving part is very important. You must take small pieces of hair and leave some behind. This makes your highlights look natural and pretty. Always work in small parts and go slow. If you rush, your highlights may look messy.

After you finish weaving and coloring, remember to take care of your hair. Use a shampoo for colored hair and don’t use too much heat. Try to keep your hair soft and healthy so your highlights stay nice for longer.

Weaving hair for highlights is not too hard if you follow the steps. Practice a little, and you will get better each time. You can even help your friends or family with their highlights too. Just remember to be gentle and careful with the hair.

Sharing is caring!